GRAFMETAL wood waterproofer allows you to protect wood or plywood from harmful weather conditions. The preparation protects against the effects of rain and sun, prevents the appearance of mold and fungi. The product is completely colorless, which will preserve the original appearance of the wood.
The waterproofer has been thoroughly tested. In the photo below, the board on the left has been saturated with the waterpoofer, while the board on the right has been left unprotected. The wood with waterproofing is resistant to moisture, while the board without protection is completely saturated with water.
Surface preparation: apply the product to clean and dried wood, favorably seasoned.
Application of the product: most conveniently applied with a brush as 1-2 coats.
Additional remarks: too thin a layer or inaccurately applied layer of impregnant may give inferior protection, do not apply just after or just before rain, if necessary, dilute with anhydrous acetone, product with biocidal additives - not suitable for contact with food, efficiency about 5-10 m2/L.
The waterproofer will be great not only for protecting wood, but also for protecting plywood, which will significantly extend its life.
The product can also be used to protect raw wood. It should be dried and seasoned beforehand.
