GRAFMETAL Anti-Graffiti Paint is a product designed to protect surfaces from being painted over and from vandalism.
Paint applied to surfaces coated with GRAFMETAL anti-graffiti varnish has poor adhesion and does not penetrate the surface’s pores. As a result, graffiti can be easily removed later using a cloth soaked in solvent.
This product is a 1-liter solvent-based varnish.
Application of the product:
1. Clean the surface before using the product. Test the product on a small area to ensure it does not damage the surface.
2. Apply the product to the DRY surface using a brush or similar tool. If the surface is highly porous, apply a second coat after waiting at least 10 minutes following the application of the first coat.
The layer cures within 24 hours. Coverage: up to 8 m²/L per one coat.
Removing graffiti from a varnished surface:
1. Soak a cloth or sponge with an appropriate solvent, such as acetone.
2. Rub the graffiti until it is removed. If the anti-graffiti coating is also damaged during removal, it is recommended to reapply it.
Paints applied to surfaces coated with our product have poor adhesion to the substrate. In addition, these paints do not wet surfaces coated with our product very well.
The easiest way to remove graffiti from surfaces coated with GRAFMETAL Anti-Graffiti Varnish is to soak a cloth in acetone or a similar solvent and then wipe the surface.
If the surface is not treated with our sealant, it will not be possible to remove the graffiti this way, as the paint will penetrate deep into the pores.
We have tested our product ourselves under real-world conditions, so we know it works.
This product is primarily suitable for protecting porous surfaces such as plaster, facades, concrete, etc.
The varnish can also be used to protect other types of surfaces. However, in such cases, we recommend checking whether the varnish alters the appearance of the surface or whether it is aggresive to previously applied paints (our varnish is a solvent-based product).
