Thermosetting glow-in-the-dark paste for filling of engravings by GRAFMETAL is great for decorating gadgets. The glowing effect is visible for up to 12 hours in the dark after prior exposure or up to 3 hours of twilight. The offer concerns a package of 25 ml of the paste. The paste is heat cured.
GRAFMETAL glow in the dark paint types are as follows:
Super strong paint
Paint for fine details
Paint for textiles and clothes
How it works?
The paste emits green-colored light after prior exposure using sunlight or artificial light. Just expose an object with an engraving filled with the paste to light for a short time (10 sec for strong light, 10 min for weak light) and then enjoy the long-lasting light emission.
How to use the paste?
1. Engrave the desired design into the item. If it is not covered with a protective film, protect it accordingly.
2. Fill the engravings with a paste and remove the excess of paste.
3. Heat up the engraving with paste to a temperature of 130-170°C with a heat gun or an iron. Avoid overheating the material to avoid deforming or damaging it. If necessary, put an object on the material after heating to prevent bending.
4. After cooling, peel off the protective film.
With this paste you will create unforgettable gadgets.
