Black stamp ink for textiles and clothes 100 ml (3.4 fl oz)

Description

Black stamp ink for clothes and fabrics by GRAFMETAL is great for marking clothes. The ink has a very intense color and is resistant to washing, primarily designed for cotton fabrics.
The offer is for a 100 ml (3.4 fl oz) of ink. Stamps for ink application can be made with lasers. One can get to know how to do it in a further part if this offer.

The ink is applied as follows:
1. Ink is applied to the stamp.
2. An absorbent material, such as cardboard, is placed under the marked material to prevent the other side from staining. The stamp is applied to the material with the inked side.
3. It is necessary to wait 1-6 hours for ink to dry.

Stamps for clothing can be made with a laser, for which plywood can be used. To increase the absorbency of the stamp, before engraving, a piece of fabric can be glued to the surface using, for example, adhesive double-sided tape. Recommended absorbent materials are, for example, polyester or cotton fabrics of 100-200 g/m2.

Depending on the type of fabric to be marked and the absorbency of the stamp, different results are obtained, as shown below.

Printing with this technique is extremely fast and inexpensive, although the prints may have minor defects, similar to what happens with stamps on clothing. If you need accurate printing, take a look at our range of plastisol inks.